Parts Diagrams

Dual Auger Spreader

2 counter-rotating augers
Smooth material delivery
UHMW idler end; does not require grease
Light in weight, carries more payload to the “V” box
Fits in existing Harder Tailgate Kit
Top safety grate
Dump load off with spreader installed
Available in four sizes for single, Tandem, tri-axel truck
Lower center of gravity than a “V” box
300 series SS through out
3.6-1 gear reducer
Easy install, removal
Excellent access all around the unit for maintenance

E104 Powder Coated Carbon Steel Spreader

Model E104 (carbon steel) for 9 foot (minimum) Box (without Doghouse)

We recommend that your truck have a central Hydraulic System capable of providing a continuous, Spreader-dedicated 18-22 gpm @ 2100 psi hydraulic pressure. Unit is approx. 10 ft. 11 inches long overall. Unit installs with approx. 102 inches in the Body. We recommend a minimum Box Floor Length (from behind any Doghouse to rear surface of Tailgate) of 108 inches for this Unit. Siderail Height = 9.2 inches. Shipping weight = approx. 1140 lbs. Tailgate Kit not included.

E112 Powder Coated Carbon Steel Spreader

Model E112 (carbon steel) for 10 foot (minimum) Box (without Doghouse)

We recommend that your truck have a central Hydraulic System capable of providing a continuous, Spreader-dedicated 18-22 gpm @ 2100 psi hydraulic pressure. Unit is approx. 11 ft. 7 inches long overall. Unit installs with approx. 110 inches in the Body. We recommend a minimum Box Floor Length (from behind any Doghouse to rear surface of Tailgate) of 120 inches for this Unit. Siderail Height = 9.2 inches. Shipping weight = approx. 1160 lbs. Tailgate Kit not included.

E144 Powder Coated Carbon Steel Spreader

Model E144 (carbon steel) for 13 foot (minimum) Box (without Doghouse)

We recommend that your truck have a central Hydraulic System capable of providing a continuous, Spreader-dedicated 18-22 gpm @ 2100 psi hydraulic pressure. Unit is approx. 14 ft. 6 inches long overall. Unit installs with approx. 146 inches in the Body. We recommend a minimum Box Floor Length (from behind any Doghouse to rear surface of Tailgate) of 157 inches for this Unit. Siderail Height = 9.2 inches. Shipping weight = approx. 1360 lbs. Tailgate Kit not included

E160 Powder Coated Carbon Steel Spreader

Model E160 (carbon steel) for 14 foot 6 inch (minimum) Box (without Doghouse)

We recommend that your truck have a central Hydraulic System capable of providing a continuous, Spreader-dedicated 18-22 gpm @ 2100 psi hydraulic pressure. Unit is approx. 16 ft. 0 inches long overall. Unit installs with approx. 164 inches in the Body. We recommend a minimum Box Floor Length (from behind any Doghouse to rear surface of Tailgate) of 175 inches for this Unit. Siderail Height = 9.2 inches. Shipping weight = approx. 1500 lbs. Tailgate Kit not included.